1600F Spot Welder DIY Capacitor Pulse Spot Welding Machine Welding Tools

Description

The spot welding machine has a compact square size of 100mm and is lightweight and portable. It can be used for 220 V household appliances. The output voltage of the spot welding machine is DC12V.
Double pulse adjustable spot welding machine. Strong and powerful performance, you can DIY support 2.5V to 3V farad capacitor. Control board with equalization function, 10A charge can fully meet the needs of DIY lithium battery players.
Suitable for assembly various kinds of lithium batteries. Support 0.2mm and below nickel plate welding, the weld joints are solid and reliable.
Support foot switch and integrated switch spot welding pen, quality materials and with fine
workmanship. Note: Do not Pressany metal parts of the fuselage with a welding pen.
Name: Spot Welding Device
Type: whole set
Material:Plastic + Metal
colour:blue
The use of the machine:
Connect the charger，the lower right corner is the rotation button, the rotation can move the cursor and adjust the value size, and the confirmation is to press the button.
1.The larger the value of the pulse, the stronger the welding ability. For example, the value of pulse one for spot welding 0.15MM nickel is about 7, and the pulse two can be adjusted.
Wait: Simply put, the larger the continuous discharge value, the longer the continuous
discharge time.
Automatic welding: It can be adjusted according to your own requirements ... (Novice recommends more than one second)
2.The voltage setting in the interface can adjust the voltage discharge voltage of the capacitor, for example: the capacitor is a single 2.8V, then the voltage is 5.6V after the series connection, if the capacitor is 2.7V, it is 5.4V adjustable, remember not to exceed the voltage after the series!
3.System setting:
(1)The charging current refers to the charging speed at which the capacitor is charged, the larger the value, the faster the charging, the value range is 1-10A
(2) Single capacitor withstand voltage: refers to the withstand voltage range of a single capacitor, such as 2.7V withstand voltage and 2.7V capacitor. This is safe. The 2.8V capacitor is set to 2.7V. This is not overvoltage and long-term use Will cause damage to the capacitor
Do not set a voltage value that exceeds the capacitance! Save and exit after making data changes!
4.E.g:
Spot welding 0.15 nickel sheets setting: pulse 1 is 5ms, pulse 2 is 5ms, and AUTO is 1S.
Spot welding 0.2mm nickel settings: pulse 1 is 12ms, pulse 2 is 5ms, AUTO for 1S
It is recommended that pulse1 and pulse2 be set within 20ms to keep the spot welder healthy
Package Contents:
1 x spot welding control board
1 pair x soldering pen
1 x power adapter