18650 Battery Spot Welder 110Gears Fine Adjustment Double Pulse OLED Display

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
18650 Battery Spot Welder 110Gears Fine Adjustment Double Pulse OLED Display
Popular
Popular
Product Introduction
Product Description:
1. OLED color screen display, the large screen is clear and clear at a glance
2. Built-in power bank function, one device, dual purpose, second power bank
3.10 levels stepless fine adjustment, millisecond level adjustment, adapt to various scenarios
4. Car power grade battery 600A amazing current, extraordinary effect
5.Imported soldering pin of pure copper penholder, conductive and durable
6.Professional-level open tuning, various parameters can be adjusted at will
The main parameters:
OLED color screen: display various parameters and status options of the machine
Enter/add key: add gear and enter setting options
Start/Exit: switch machine, exit and downshift operation keys
Soldering pen interface: used to connect the soldering pen
USB power bank interface: act as a power bank to charge external devices
Type-C charging port: can be charged with mobile phone chargers, all mobile phone chargers can be charged
Charging indicator: flashing (charging in progress) steady on (charging completed) while charging, the battery icon on the screen also shows the charging status
Button function introduction
1. Increase the gear position: Short press the left button once to increase 5 gears (fast increase-coarse adjustment), a total of 110 gears, the 110th gear has the strongest welding ability
2. Decrease the gear position: Short press the right button to decrease 1 gear (step down gear-fine adjustment), which can be used to fine-tune the welding strength
3. Power on and off: In the main interface, press and hold the right button for more than 2 seconds to shut down. When it is off, press and hold the right button to power on
4. Enter the advanced settings menu: long press the left button for more than 2 seconds to enter the advanced settings menu (inexperienced people are advised not to adjust the advanced settings)
5. After entering the setting menu: short press the left button to page down, short press the right button, page up, long press the left button to enter the submenu, long press the left button to exit the menu and automatically save the settings
Spot welding power setting:
Starting from the first gear, slowly increase the power until it can be welded. Do not increase the power if you can weld. Avoid MOS bombs. Black solder joints indicate that the power is too high.
When soldering, gently press down on the solder pins, the nickel sheet and the battery can be bonded together. The harder you press, the weaker the welding will be. It will be triggered automatically after pressing for one second
List:
OLED host X1
Tip soldering pen X2
USB charging cable X1
Nickel sheet X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
18650 Battery Spot Welder 110Gears Fine Adjustment Double Pulse OLED Display
Product Introduction
Product Description:
1. OLED color screen display, the large screen is clear and clear at a glance
2. Built-in power bank function, one device, dual purpose, second power bank
3.10 levels stepless fine adjustment, millisecond level adjustment, adapt to various scenarios
4. Car power grade battery 600A amazing current, extraordinary effect
5.Imported soldering pin of pure copper penholder, conductive and durable
6.Professional-level open tuning, various parameters can be adjusted at will
The main parameters:
OLED color screen: display various parameters and status options of the machine
Enter/add key: add gear and enter setting options
Start/Exit: switch machine, exit and downshift operation keys
Soldering pen interface: used to connect the soldering pen
USB power bank interface: act as a power bank to charge external devices
Type-C charging port: can be charged with mobile phone chargers, all mobile phone chargers can be charged
Charging indicator: flashing (charging in progress) steady on (charging completed) while charging, the battery icon on the screen also shows the charging status
Button function introduction
1. Increase the gear position: Short press the left button once to increase 5 gears (fast increase-coarse adjustment), a total of 110 gears, the 110th gear has the strongest welding ability
2. Decrease the gear position: Short press the right button to decrease 1 gear (step down gear-fine adjustment), which can be used to fine-tune the welding strength
3. Power on and off: In the main interface, press and hold the right button for more than 2 seconds to shut down. When it is off, press and hold the right button to power on
4. Enter the advanced settings menu: long press the left button for more than 2 seconds to enter the advanced settings menu (inexperienced people are advised not to adjust the advanced settings)
5. After entering the setting menu: short press the left button to page down, short press the right button, page up, long press the left button to enter the submenu, long press the left button to exit the menu and automatically save the settings
Spot welding power setting:
Starting from the first gear, slowly increase the power until it can be welded. Do not increase the power if you can weld. Avoid MOS bombs. Black solder joints indicate that the power is too high.
When soldering, gently press down on the solder pins, the nickel sheet and the battery can be bonded together. The harder you press, the weaker the welding will be. It will be triggered automatically after pressing for one second
List:
OLED host X1
Tip soldering pen X2
USB charging cable X1
Nickel sheet X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.