1HP Single Phase 230/115 Volt 3450 RPM Air Compressor Electric Motor

Description

WELCOME TO OUR STORE
Features
Motor base installation can increase the stability of the motor
The shell material is cast iron shell suitable for installation in some places where the driving force is high or the environment is poor
CW/CCW can be designed with general motor
The motor is counterclockwise (counterclockwise) reversible
Reduced start current design ensures reduced start voltage at rated load
Equipped with UL approved manual thermal overload, capacitors and high quality ball bearings to ensure service life
Specification
Toop-industriducts
Your Best Online Business Partner
1HP Single Phase 230/115 Volt 3450 RPM Air Compressor Electric Motor
WELCOME TO OUR STORE
Features
Motor base installation can increase the stability of the motor
The shell material is cast iron shell suitable for installation in some places where the driving force is high or the environment is poor
CW/CCW can be designed with general motor
The motor is counterclockwise (counterclockwise) reversible
Reduced start current design ensures reduced start voltage at rated load
Equipped with UL approved manual thermal overload, capacitors and high quality ball bearings to ensure service life
Specification
AC Frequency Rating：60 Hz
Reversible/Non-Reversible：Reversible
Nominal Rated Input Voltage：115/230 V
Rated Load (HP)：1
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：５/8 in
Enclosure Type： TEFC (Totally Enclosed Fan Cooled)
AC Phase：Single Phase
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole :２
Amps：11.2/5.6 A
AC Motor Type：Induction/Asynchronous
Base RPM：3450RPM
IP Rating：IP55
Shaft Length：1.88in
Protector：Non
Housing Material：Rolled steel shell
Model:General Electric Motor
IEC Frame Size：56C
Note
Check whether the moving parts are flexible, the connecting parts are fastened, the lubrication system is normal, and the motor and electrical control equipment are safe and reliable
Air compressor before operation should check whether the protection device and safety accessories are in good condition
Connect water source and open inlet valve, make cooling water unimpeded
Check whether the exhaust pipe is unblocked
Check the amount of oil in the oiler, the amount of oil should not be lower than the scale value and lubricating oil in the oil pool should be within the scale range
Package List
1 x 1HP General Electric Motor
1 x Manual
Item Specifics
Brand
Toop
MPN
161311-toop
Rated Load (HP)
1
Current Type
AC
Nominal Rated Input Voltage
115 V
AC Phase
Single Phase
Special Motor Construction
Spindle Motor
Pole
2
Shaft Diameter
5/8 in
Base RPM
3450
AC Motor Type
Induction/Asynchronous
IEC Frame Size
56C
AC Frequency Rating
60 Hz
Amps
11.2 A
Reversible/Non-Reversible
Reversible
Payment
We only accept payment through PayPal. Payment should be done within 7 days after the end of the Auction.
Attention intellectual property
1. We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any other Intellectual Property Rights, We will remove any offending listing immediately while awaiting further discussion.
Shipping
1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
3.We ship to US ONLY.
4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
Shipping & handling cost are not refundable.
Man-made damage by abuse or wrong operation is not covered by this warranty.
No product liability insurance is assumed.
Contact Us
We fully understand how critical it is to keep communications as smooth and quick as possible. Many issues could be resolved by themselves thru well communications.
We are trying every effort to answer your questions and inquiries in a timely manner.Please note that our office is closed during weekend and holidays.
If you dont receive our response within 12 business hours window, please contact us again,If still no response, most times it is because your email did not go thru successfully or you sent to the wrong email address. Please keep in mind that by no means we would ignore your emails and not respond on purpose
Toop-industriducts
Your Best Online Business Partner
WELCOME TO OUR STORE
Features
Motor base installation can increase the stability of the motor
The shell material is cast iron shell suitable for installation in some places where the driving force is high or the environment is poor
CW/CCW can be designed with general motor
The motor is counterclockwise (counterclockwise) reversible
Reduced start current design ensures reduced start voltage at rated load
Equipped with UL approved manual thermal overload, capacitors and high quality ball bearings to ensure service life
Specification
AC Frequency Rating：60 Hz
Reversible/Non-Reversible：Reversible
Nominal Rated Input Voltage：115/230 V
Rated Load (HP)：1
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：５/8 in
Enclosure Type： TEFC (Totally Enclosed Fan Cooled)
AC Phase：Single Phase
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole :２
Amps：11.2/5.6 A
AC Motor Type：Induction/Asynchronous
Base RPM：3450RPM
IP Rating：IP55
Shaft Length：1.88in
Protector：Non
Housing Material：Rolled steel shell
Model:General Electric Motor
IEC Frame Size：56C
Note
Check whether the moving parts are flexible, the connecting parts are fastened, the lubrication system is normal, and the motor and electrical control equipment are safe and reliable
Air compressor before operation should check whether the protection device and safety accessories are in good condition
Connect water source and open inlet valve, make cooling water unimpeded
Check whether the exhaust pipe is unblocked
Check the amount of oil in the oiler, the amount of oil should not be lower than the scale value and lubricating oil in the oil pool should be within the scale range
Package List
1 x 1HP General Electric Motor
1 x Manual
1HP Single Phase 230/115 Volt 3450 RPM Air Compressor Electric Motor
Payment
We only accept payment through PayPal. Payment should be done within 7 days after the end of the Auction.
Attention intellectual property
1. We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any other Intellectual Property Rights, We will remove any offending listing immediately while awaiting further discussion.
Shipping
1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
3.We ship to US ONLY.
4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
Shipping & handling cost are not refundable.
Man-made damage by abuse or wrong operation is not covered by this warranty.
No product liability insurance is assumed.
Contact Us
We fully understand how critical it is to keep communications as smooth and quick as possible. Many issues could be resolved by themselves thru well communications.
We are trying every effort to answer your questions and inquiries in a timely manner.Please note that our office is closed during weekend and holidays.
If you dont receive our response within 12 business hours window, please contact us again,If still no response, most times it is because your email did not go thru successfully or you sent to the wrong email address. Please keep in mind that by no means we would ignore your emails and not respond on purpose
All rights reserved.