4-AXIS (TB6560) CNC DRIVER BOARD 4 STEPPER MOTOR ROUTER

Description

4 AXIS TB6560 CNC STEP MOTOR DRIVER 's features:
HUGE improvements
from TA8435 based boards **
Resolution:
Full step, 1/2, 1/8,1/16
selectable via switch for each axis.
Absolute maximum ratings:
40VDC @ 3.5 amps
(peak)/phase motor output per axis *
PC parallel port DB25 connector has being installed onboard.
Adjustable motor current at 100%, 75%, 50%, 20% of full current by on-board switch
Supports different 4 Wire, 6 Wire and 8 Wire stepper motors for 3 axis drive.
Built-in
overheat protection
circuit in TB6560
This board is tested through KCAM, Mach 2/3, touborCNC CNC software.
This board has been used in different design 3D engrave machines, millers, routers.
Double Buffer
for Interface and Driver for
reliable
Driving and
protecting
Computer and driver board.
1KV, 10 Mbps
high speed Optocoupler
for full elimination to protect Computer and driver board.
Step Current
(r)
Technology included: Step Current technology is used to decrease the current upto 1/2, when motors are in idle for all axis so as to
protect
expensive step motor and driver board for
long time running
.
* See TB6560 Datasheet by TOSHIBA. The full current is preset at 2.5A by resisters for this board (you can adjust it by changing them).
**Comparison between TA7835 (used in Univelop V1.0 CNC driver) and TB6560 (used in V2.0 CNC driver board):
V 1.0 (TA7835)
V 2.0 (TB6560)
IC Overheat protection
N/A
Built-in
Current Adjustable
100%/50%
100%/75%/50%/20%
Current for motor
Peak 2.5A
Peak 3.5A [*]
Voltage for motor
Max 35V
Max 40V [*]
Micro stepping
1 – 1/8
1 – 1/16
Frequency (fOSC)
Max 80kh
Max 600khz
This auction provides you :
One 5-axis CNC Interface Board
Four1-Axis CNC driver boards
4 Connection cables
a Manual.
We also sell additional 1-axis driver board, interface board, cables for extension of our 5 axis driver boards, and other components.
Thanks.
Posted with
eBay Mobile