550V4 Grow Light Samsung lm301h 3500k with SWITCHABLE Red IR UV 500w HLG driver

Description

WE AT GROWDADDYLEDS.COM ARE PROUD TO PUT TOGETHER THIS LIMITED TIME WEBSITE GRAND OPENING DEAL FOR YOU ONLY WHILE SUPPLIES LAST
READ THE FINE PRINT ON OTHER LISTINGS - THESE ARE ALREADY ASSEMBLED, IN STOCK AND READY TO SHIP FROM THE USA
If you wanna get started growing quick with a great light, this is the one:
*PLUG-N-PLAY
*1088 Total LEDs including 1024 of the unmatched Samsung lm301h in 3500k
*Meanwell HLG Driver
*500w(AT THE WALL)
DON'T PAY MORE FOR BRAND NAMES OR THE ONES WITH FAKE 1000W-4000W CLAIMS THAT REALLY HAVE 100W - 400w.
Ours also use the top of the line Meanwell HLG drivers and we use a hefty 5mm thick heatsink compared to their 2mm - 4mm heatsinks.
This listing is for one 500W Quantum Grow Light with Deep Red, UV, and IR including:
RED, UV, AND IR are controlled by a separate switch*
4 - 272 LED V4 style Boards with Red, UV, and IR with a total of:
1024 pcs 3500k Samsung LM301H Top Bin high-quality diodes
48 pcs 660nm Deep Red diodes
8 pcs 730nm Far Red(IR) diodes
8 pcs UV diodes
•3500K lm301h
•80 CRI
•Board Dimensions 286mm x174mm x 1.6mm each
Heat sink : 660mm x 490mm x 5mm
Meanwell HLG-480H-C2100B
Fully Assembled - all you will need to do is hang it up(ratchet hangers included), plug it in, and you're ready to go.
I even have the dimmer already attached to your driver
This is a 500W LED light consisting of four qb272 v4 style boards with 256 Samsung lm301H leds in 3500k and another 12 - 660nm Deep Red LEDs, 2 - 730nm Far Red(IR) LEDs, and  2 - UV LEDs per board. The Red, UV, and IR are controlled by a switch on each board*. These boards come already mounted onto the hefty 5mm thick 26" x 20" heatsink and pre-wired. It comes with a Meanwell HLG 480H-C2100B driver with a dimmer already attached. All you will need to do is hook up your ratchet hangers, plug it in, and you are ready to grow. We always ship DISCREET and this is a private listing as always so your purchase can remain anonymous on ebay.
*Always un-plug light before turning red switches on or off. If multiple boards are on the same light, all switches must be the same(on or off) for light to operate correctly.