5V MAX 2.4A Mini Portable Spot Welder Welding Machine For Battery 18650 Battery

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
5V MAX 2.4A Mini Portable Spot Welder Welding Machine For Battery 18650 Battery
Popular
Popular
Product Introduction
Product introduction:
Features:
① 9 levels of power adjustable
②2A high current charging, fast charging speed
③Power bank USB output function (5V MAX2.4A)
④(Patented design) The welding needle can be replaced, and the welding pen is integrally formed, and the welding will not be hot
⑤Program update, more user-friendly operation
⑥Free 2m nickel sheet
Instructions for use:
Charge the product first, save it at low voltage by default, and need to be fully charged for welding test.
"Turn on" Press and hold the button for 3 seconds, then release the button when you hear the boot sound.
"Shutdown" Press and hold the button for 3 seconds, then release the button when you hear the shutdown sound.
"Gear switch" short press the button, the buzzer will sound "beep" and then switch gears, the LED indicator will show correspondingly after the switch is successful
"Automatic shutdown" will start automatic shutdown if no welding work is performed within 15 minutes.
"USB charging function" is inserted into the USB to automatically turn on the USB output. When the load current is less than 50mAh, the USB will automatically turn off the output. Short press the button to trigger the USB output.
"Welding operation" After inserting the soldering pen, first use the first gear to weld. After placing the soldering pen, the host recognizes that the soldering pen is placed and starts welding 0.5 seconds, and then adjusts the gear according to requirements. If you use high-power gear for welding Restart, you can connect an external USB charging cable for welding operations.
The buzzer keeps on sounding after the “error warning” is turned on, indicating that the main unit is damaged and welding operations cannot be performed
Precautions:
1. It's recommended to weld nickel sheets below 0.15mm (Can welding 0.15mm).
2. It's recommended to weld when battery power over 70% for better welding effect.
3. Pay attention to the placement of the soldering pen,if the  pressure of the soldering pen too loose,will break down the nickel sheet.
Package Included:
Spot welding machine X1
Spot Welding Pen X2
TYPE C charging cable X1
Nickel sheet X1
English manual X1
Plastic box X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
5V MAX 2.4A Mini Portable Spot Welder Welding Machine For Battery 18650 Battery
Product Introduction
Product introduction:
Features:
① 9 levels of power adjustable
②2A high current charging, fast charging speed
③Power bank USB output function (5V MAX2.4A)
④(Patented design) The welding needle can be replaced, and the welding pen is integrally formed, and the welding will not be hot
⑤Program update, more user-friendly operation
⑥Free 2m nickel sheet
Instructions for use:
Charge the product first, save it at low voltage by default, and need to be fully charged for welding test.
"Turn on" Press and hold the button for 3 seconds, then release the button when you hear the boot sound.
"Shutdown" Press and hold the button for 3 seconds, then release the button when you hear the shutdown sound.
"Gear switch" short press the button, the buzzer will sound "beep" and then switch gears, the LED indicator will show correspondingly after the switch is successful
"Automatic shutdown" will start automatic shutdown if no welding work is performed within 15 minutes.
"USB charging function" is inserted into the USB to automatically turn on the USB output. When the load current is less than 50mAh, the USB will automatically turn off the output. Short press the button to trigger the USB output.
"Welding operation" After inserting the soldering pen, first use the first gear to weld. After placing the soldering pen, the host recognizes that the soldering pen is placed and starts welding 0.5 seconds, and then adjusts the gear according to requirements. If you use high-power gear for welding Restart, you can connect an external USB charging cable for welding operations.
The buzzer keeps on sounding after the “error warning” is turned on, indicating that the main unit is damaged and welding operations cannot be performed
Precautions:
1. It's recommended to weld nickel sheets below 0.15mm (Can welding 0.15mm).
2. It's recommended to weld when battery power over 70% for better welding effect.
3. Pay attention to the placement of the soldering pen,if the  pressure of the soldering pen too loose,will break down the nickel sheet.
Package Included:
Spot welding machine X1
Spot Welding Pen X2
TYPE C charging cable X1
Nickel sheet X1
English manual X1
Plastic box X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.