-40%
Crestron 1800Watt A/C Power Supply CNPC-1A
Crestron 1800Watt A/C Power Supply CNPC-1A
Crestron 1800Watt A/C Power Supply CNPC-1A
Crestron 1800Watt A/C Power Supply CNPC-1A

Crestron 1800Watt A/C Power Supply CNPC-1A

$ 14.25

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Output Power: 1800 W
  • Maximum Current Output: 15 A
  • Item must be returned within: 30 Days
  • Brand: Crestron
  • MPN: Does Not Apply
  • Maximum Voltage Output: 120 V
  • Number of Channels/Outputs: 1
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Condition: Gnetly used, but in good shape.

    Description

    The CNPC-1A provides on/off switching of AC power to any single device or load up to 15 Amps. The CNPC-1A may be controlled from any relay port or Versiport. A 3-position switch on its front panel may be used to manually force power on, or to send a momentary low-voltage contact closure signal to the control system to trigger a "power up" command. Although the CNPC-1A is not a Cresnet device, it does require DC power (24 and G) from the Cresnet bus.
    Connectors
    AC OUTPUT
    (1) 3-prong grounded AC socket, switched AC power outlet;
    Maximum Load: 15 Amps at 120 Volts AC tungsten load
    AC INPUT
    (1) Attached cable with grounded AC plug;
    Connects to AC power source
    24V/IN/SW/C
    (1) 4-pin 5mm detachable terminal block;
    24V: DC power input, connects to the ‘24’ terminal of the Cresnet bus;
    IN: Control input, connects to any Versiport digital output, or any relay port referenced to system ground;
    SW: Contact closure output, connects to any Versiport or other digital input port;
    C: Common, connects to the ‘G’ terminal of the Cresnet bus;
    The CNPC-1A must not be connected to the ‘Y’ or ‘Z’ terminals of the Cresnet Bus
    LED Indicators
    PWR
    Indicates that the power relay is engaged
    24V
    Indicates that 24 Volts DC is supplied to the unit