DIY Portable Crystal Mini Welding Machine Lithium Cell Welding A6L0

Description

Portable mini crystal -, compact size, easy to operate which is mainly used for maintenance of small energy demand machines such as cell packs, electric playthings and model airplanes.
Features:
Wide selection of welding : lithium cell energy or auto cell.
The controller is controlled by a chip microcomputer, and the output pulse is accurate to ensure the welding quality.
With LCD display screen, can display welding parameters.
The welding pen and the input line are connected by U-shaped cold-pressed terminals, which is convenient for disassembly and replacement.
Using automatic welding mode, while retaining the manual trigger interface.
The energy board uses 2 Gusi copper to increase the overcurrent capacity.
Using 5 300A MOS tubes, non-disassembled MOS tubes.
The MOS tube driver adopts the special chip driver.
The most quick MOS tube can be hit with 20nS.
The switch is quick to the explosion of the tube and the non-triode push-pull drive.
The MOS drive design adds a transient diode to protect the MOS and the explosion of the tube.
10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the overcurrent capacity.
The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.15mm.
A 25V10000uF high-frequency low-resistance capacitor is added to the energy input for energy compensation, which increases welding stability.
Specifications:
Material: Metal
Input Line Length: app.200mm / 7.87in
Length Of Welding Pen: app.300mm / 11.81in
Color: Red+Blue+Black
Cell: Lithium Cell (not included)
Quantity: 1Suit
Package Weight: 203g / 7.16ounces
Package Size: 100 * 80 * 40mm / 3.94 * 3.15 * 1.57in
Note:
Cell selection:
1: auto cell from 25 to 40ah, requires nice performance and low internal resistance
2: 4000 to 6000mAh 45C to 60C 3S model lithium cell
3: 30 to 35ah capacity lithium cell
Welding Materials: Welding 0.1～0.12mm thick nickel-plated steel
Energy Setting:
Energy gradually increase from 01, and the maximum cannot exceed 50
Exceeding the above conditions may damage the controller
Packing List:
1 * Controller
1 * Welding Pen
2 * Energy Input Line (Red And Blue)
2 * U-Shaped Cold-Pressed Terminal
Several Heat-Shrinkable Tubes