LS Classic Series GMLS2004M Gen IV Valley Plate, Breather

Description

LS Classic Series Gen IV Valley Plates incorporate a high efficiency breather assembly and port for superior crankcase ventilation. Precision CNC-machined from 3/8” billet aluminum, the plates replace the stock cast aluminum 11 bolt valley pans on late model, Gen IV LS engines. Integral O-ring bosses on the bottom side of the valley plate blocks off the Displacement on Demand passages (No other DOD delete kit is necessary). Installation requires relocation of the oil pressure sender (a remote mount is included). The valley plates are available with a cast finish and include all of the necessary O-rings, seals, and stainless steel fasteners. Breather valley plates have NO provision for oil filling.
GMLS2004M Gen4/LS2/3/7 Breather Valley Plate
Machined from 3/8” billet aluminum plate
LS Classic Series GMLS2004M Gen IV Valley Plate, Breather
Sku # 491GMLS2004M
Mfr. Part # GMLS2004M
Condition
New
Brand
LS Classic
Sold
Kit
Details
Info
LS Classic Series Gen IV Valley Plates incorporate a high efficiency breather assembly and port for superior crankcase ventilation. Precision CNC-machined from 3/8” billet aluminum, the plates replace the stock cast aluminum 11 bolt valley pans on late model, Gen IV LS engines. Integral O-ring bosses on the bottom side of the valley plate blocks off the Displacement on Demand passages (No other DOD delete kit is necessary). Installation requires relocation of the oil pressure sender (a remote mount is included). The valley plates are available with a cast finish and include all of the necessary O-rings, seals, and stainless steel fasteners. Breather valley plates have NO provision for oil filling.
GMLS2004M Gen4/LS2/3/7 Breather Valley Plate
Machined from 3/8” billet aluminum plate
Replaces the stock 11 bolt valley pan in LS3/Gen 4 LS engines
Incorporates a high efficiency breather assembly and external port for superior engine breathing
Integral O-ring bosses block off the Displacement on Demand passages. No other DOD kit is necessary.
Requires relocation of the oil pressure sender, a billet aluminum relocation mount is included
Includes all the necessary O-rings, seals, and fasteners
Available with a raw machined or semi-gloss black powder coat finish
Valley plate works with all LS Classic intake kits
Plate has NO provision for filling oil
Made in the U.S.A.
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
This item is being shipped to you directly from the manufacturer and is subject to an increased handling time. Delivery estimates that include the handling time are displayed on the "Shipping and Payments" tab.
This item is being shipped to you directly from the manufacturer and is subject to an increased handling time. Delivery estimates that include the handling time are displayed on the "Shipping and Payments" tab.
Specs
Material Type
Aluminum
Sold in Quantity
Each
Finish
Natural
Color
Natural
Hardware Included
Yes
Valley Plate Included
Yes
Pulley Included
No
Overall Thickness
0.375
Oil Fill Cap Included
No
GTIN Code
847087044882
MFG. Part #
GMLS2004M
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.