Pentair Intelliflo® VS pump controller similar to Intellicom 2 Intellicom II

Description

These boxes can command the 4 different remote speeds of an Intelliflo Pentair VS pump. They work very similar to the Intellicom 2 units from Pentair which sell here on Ebay for 0 - 0. So why pay so much when one of these is a fraction of the cost and are easier to connect and also help meet new CA compliance. There are 4 inputs that can use a relay or switch for input and the unit transmits the signal on the control cable that comes with the pump to run the 4 programmed speeds that are entered in the normal pump control pad that is on the pump. Holding the contact closed will keep the pump running at that speed. View the photo of the manual for more connection details. User needs some basic wiring skill.
This is the perfect thing to control the new Variable Speed Intelliflo Pentair pump (VS the only type that can be sold in many places now) and allow you to control it with your old 2 speed Pentair,  Hayward, Jandy etc
.
control system.
If you already have a VS comparable Pentair or Hayward panel and need to control the opposite manufacturers pump check out the "Pump Link" also by Upstream Controls at
https://www.ebay.com/itm/401981762907
This unit helps to meet compliance with the new 24 hour rule of the new California requirements for pool pump power usage.
Units come in a 3D printed box (PETG), so there may be some slight cosmetic imperfections in some of the boxes, but in no way affect the working properties of the unit.  (If you personally also do 3D printing you will understand).
Unit size including tabs and connectors are X:3.5" x Y:2.2" x Z:1.15".