RUPES BigFoot LHR 19E Rotary Polisher kit

Description

RUPES LH19E ROTORY BUFFING KIT
A powerful 1200watt motor is mated to a double gear reduction system that produces incredible torque and consistency through the entire speed range from 450 up to 1700 RPM. Speeds are controlled via an all new electronic speed control dial features large displayed speed settings and a smooth selection wheel that allows users to set their speed and adjust easily even during operation. Further adding to the control is a new progressive trigger design that allows for virtually endless levels of adjustment within the speed range, acting as a throttle lever for fine adjustments without changing the main speed setting. The LH19E includes a heavy duty 9 meter (29.5 feet) cord, eliminating the need for extension cords in most cases. The extra flexible rubberized coating of the cord makes it durable and with the proper AWG for the length you can rest assured that the polisher will be receiving the appropriate voltage at all times. The LHR19E includes an innovative anti-vibration loop handle in all configurations. The soft grip material and proprietary design absorb and dissipate vibration to improve operator comfort as well as protect delicate surfaces if accidental contact occurs. The optional side handle (included in some kit configurations) also integrates innovative RUPES designs to eliminate vibrationand promote maximum operator comfort. Additionally the tool features rubberized grips and ergonomic handles built right into the tool itself should a user prefer to run without a handle at all.
FREE LAKE COUNTRY BUFFING PADS
3 FREE LAKE COUNTRY FORCED 5.5" BUFFING PADS
Improved Design to Our HYBRID Foams With a New Cutting Pad
• Hybrid foams are specifically engineered with small cells and dense construction to keep abrasives in the chemicals close to the surface of the pad. This results in faster correction time as more polish stays on the working surface rather than being absorbed into the foam.
• Engineered for forced rotation and Rotary Machines
• Tapered design and 1-1/4” (32mm) thickness provide a user experience unlike other pads on the market
• FORCE™ pads use the same HYBRID foam technology and now combine a ventilated center hole for cooling and centering
• NEW HYBRID Grey Foam ... Is a heavy cutting pad that is firm and resists collapsing with heat.  These pads work great for heavy defect removal and spot repair, but also work great for polishing on very hard clear coats.  This pad is highly recommended in areas with high heat and/or humidity, can also be “broken in” by soaking in warm water and spinning dry.
• HYBRID Orange Pad ... has been a favorite for years.  This pad works great for cutting in colder climates, but can be used as a light cutting pad in warmer temperatures. This foam softens with heat throughout the polishing cycle to give a good bite in cutting ability but still finishes well.
• HYBRID White Foam ... is a staple for polishing and leaves a perfect finish on many paints.  The partially closed cell construction helps “smash” or “sandwich” the abrasive to the surface to maximize the result.
A signature will be required upon delivery.
No International Shipping Available