Sorensen DCS20-60E Power Supply, 0-20 V, 0-60 A (DCS2060E)

Description

Sorensen DCS20-60E Power Supply, 0-20 V, 0-60 A (DCS2060E)
This is a
Sorensen DCS20-60E Power Supply, 0-20 V, 0-60 A (DCS2060E)
.
What you will get:
Sorensen DCS20-60E Power Supply, 0-20 V, 0-60 A (DCS2060E)
Instructions
(May be on CD or DVD)
If you remind me, I will include a power cord.  You will have to cut off the end and wire it to the power supplies screw terminals.  If you don't remind me, this will not ship with a power cord.
This is my item 827.  1 were available at listing time.
Check out my
other items
where I have a lot of other scientific equipment and accessories for sale.
More Information:
Form Factor: Rackmount
Connectivity: GPIB ( /M9C )
LAN ( /M130 ) (Option) Not included
LXI Compliant ( /M130 )
RS232 ( /M130 /M9C )
Current 60 A
Power 1200 W
Type CV/CC
Voltage 20 V
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilizes unique packaging techniques to achieve continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits in a low profile chassis., Demonstrated large installed base over a long period of time, the DCS family provides a highly reliable power platform.
This DCS power supply family has an easy-to-use front panel with 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and over voltage protection, status and constant-voltage/current mode operation. The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.
The Sorensen DCS family can also be controlled remotely. Four analog control modes are standard as well as isolated analog control (option). Computer control can be accomplished over IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option).
Description
DCS Series power supplies are 1000W and 1200W supplies designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The DCS Series employs high frequency switching regulator technology to achieve high power density and small package size.
The series consists of twelve 1000W models and twelve 1200W models. The model numbers are designated by the DCS prefix, followed by the output voltage and current ratings. For example, the model number DCS 60-18E indicates that the unit is rated at 0-60 Vdc and 0-18 Amps while a model DCS 20-50E is rated at 0-20 Vdc and 0-50 Amps.
1.2 Operating Modes
The DCS Series supply has two basic operating modes: Constant Voltage and Constant Current. In constant voltage mode the output voltage is regulated at the selected value while the output current varies with the load requirements. In constant current mode the output current is regulated at the selected value while output the voltage varies with the load requirements.
An automatic crossover system enables the unit to switch operating modes in response to varying load requirements. If, for example, the unit is operating in voltage mode and the load current attempts to increase above the setting of the current control, the unit will switch automatically from voltage mode to current mode. If the load current is subsequently reduced below the setting of the current control the unit will return to voltage mode automatically.
1.3 Power Supply Features
• Twelve 1kW models with voltage ranges from 0-8 Vdc to 0-600 Vdc and current outputs from 1.7A to 125A.
• Twelve 1.2kW models with voltage ranges from 0-8 Vdc to 0-600 Vdc and current outputs from 2A to 140A.
• 115/230 Vac selectable input voltage, 50-60 Hz single phase, Installation Category II. For Indoor Use.
• Simultaneous digital display of both voltage and current.
• Automatic mode crossover into current or voltage mode.
• Ten turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the rated output.
• Flexible output configuration: multiple units can be connected in parallel or series to provide increased current or voltage.
• High frequency switching technology allows high power density, providing increased power output in a small, light package.
• Remote sensing to compensate for losses in power leads.
• Adjustable Over-Voltage Protection (OVP)
• External TTL, AC or DC shutdown
• Remote voltage, resistive, current limit and OVP programming with selectable programming constants.
• External indicator signals for remote monitoring of OVP status, local/remote programming status, thermal shutdown, and output voltage and current.
• Optional IEEE-488 interface for complete remote programming and readback capability.
Please use the shipping calculator to determine shipping.
Check out my
other items
!
If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving feedback.
I strive to make sure every transaction is a positive one!
IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved.
I stand behind my items and will work out any problems that you may have with an item.
So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication.
International Buyers, Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". US and International government regulations prohibit such behavior.
Powered by SixBit's eCommerce Solution