Spot Welder DIY Kit 9-Gears Adjustable Mini Spots Welding Machine Control Board

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Spot Welder DIY Kit 9-Gears Adjustable Mini Spots Welding Machine Control Board
Popular
Popular
Product Introduction
Features:
Pure copper conducts electricity and conducts heat, improving spot welding efficiency.
Alumina copper spot welding pin for high current passing capability and durability.
Positive and negative marking, not easy to connect the wrong line.
High frequency capacitor, low internal resistance, high temperature resistance.
9-speed power adjustment, digital tube displays the gear in real time.
Specification:
Name: Spot Welder Set
Material: Printed Circuit Board
Working voltage: 6.5-16V
Working current: <20ma
Standby power consumption: <0.5ma
Recommended operating temperature: -10°C to 60°C
Voltage: 12.0V
Welding current: 1700A Max
Welding thickness: 0.1-0.3mm
The following battery packs can be used as operating power sources:
12V car starting power supply, model aircraft 3S high-rate battery pack, three-string high-rate lithium battery pack, supercapacitor pack, polymer high-rate battery pack
40900 3-string battery pack, 12V 20A and above lead-acid batteries with good performance.
Calculation formula: capacity X discharge rate = load capacity
Take a 4000ma model aircraft battery as an example, the discharge rate is 45C (4AX45C=180A)
Instructions for use:
Function keys: 1, for switching machines, 2 for switching gears!
When powered on, you need to press it once to turn it on, the default is 0 gear. Press and hold the button for 1 second to release
Increase the gear by one gear, the buzzer will sound, and the LED light will flash corresponding to the gear.
For example: 3 gears, the buzzer sounds 3 times, the LED flashes 3 times, a total of 9 gears. 1st to 5th gear spot welding 0.1-0.15,
5-7 gear welding 0.2, 8-9 gear welding 0.25-0.3 Press and hold the button again for about 3 seconds. It will power down. In the off state, short press the power on, the gear will return to 0 gear
packing list:
Control board X1
Input cable X2
Soldering pen X2
Screw X4
Nickel sheet X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Spot Welder DIY Kit 9-Gears Adjustable Mini Spots Welding Machine Control Board
Product Introduction
Features:
Pure copper conducts electricity and conducts heat, improving spot welding efficiency.
Alumina copper spot welding pin for high current passing capability and durability.
Positive and negative marking, not easy to connect the wrong line.
High frequency capacitor, low internal resistance, high temperature resistance.
9-speed power adjustment, digital tube displays the gear in real time.
Specification:
Name: Spot Welder Set
Material: Printed Circuit Board
Working voltage: 6.5-16V
Working current: <20ma
Standby power consumption: <0.5ma
Recommended operating temperature: -10°C to 60°C
Voltage: 12.0V
Welding current: 1700A Max
Welding thickness: 0.1-0.3mm
The following battery packs can be used as operating power sources:
12V car starting power supply, model aircraft 3S high-rate battery pack, three-string high-rate lithium battery pack, supercapacitor pack, polymer high-rate battery pack
40900 3-string battery pack, 12V 20A and above lead-acid batteries with good performance.
Calculation formula: capacity X discharge rate = load capacity
Take a 4000ma model aircraft battery as an example, the discharge rate is 45C (4AX45C=180A)
Instructions for use:
Function keys: 1, for switching machines, 2 for switching gears!
When powered on, you need to press it once to turn it on, the default is 0 gear. Press and hold the button for 1 second to release
Increase the gear by one gear, the buzzer will sound, and the LED light will flash corresponding to the gear.
For example: 3 gears, the buzzer sounds 3 times, the LED flashes 3 times, a total of 9 gears. 1st to 5th gear spot welding 0.1-0.15,
5-7 gear welding 0.2, 8-9 gear welding 0.25-0.3 Press and hold the button again for about 3 seconds. It will power down. In the off state, short press the power on, the gear will return to 0 gear
packing list:
Control board X1
Input cable X2
Soldering pen X2
Screw X4
Nickel sheet X1
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.