VOUGHT F4U CORSAIR(Wingspan 1.9m / 75in 3D Printed RC

Description

VOUGHT F4U CORSAIR(Wingspan 1.9m / 75in 3D Printed RC
. Condition is New.
I print in Blue, and if you want another color most people paint them anyway.  any and all questions are welcome.  I can print any plane from https://3dlabprint.com/If I have it in stock, it will ship out the next business day, Otherwise I need 5-7 days to print and ship out
These models come with a PDF file for decals
Includes: All printed parts for model
More details for the model can be found at 3d LabPrint's website:https://3dlabprint.com/wp-content/uploads/2018/03/3DLabPrint_F4U_userguide.pdf
General specifications:
Length: 1520 mm / 60 inch
Wingspan: 1900mm / 75 inch
Height: 698 mm / 27 inch
Wing area: 67.4 dm2 / 5.53 sq ft
Wing loading: 88.3 g/dm2 / 26.3 oz at sq ft
Center of gravity: 115mm / 4.5 in from LE
Airfoil: 3DLabPrint Cor01
Weight of printed parts (w/o wheels): 3710 g / 72.7 oz
Takeoff weight (8s 5000mAh Li-Pol): 5950 g / 130.5 oz
Max takeoff weight: 6400 g / 148.2 oz
Never exceed speed, VNE: 160 km/h / 99.4 mph
Design maneuvering speed, VA: 110 km/h / 74.6 mph
Stall speed, VS(full flaps): 42 km/h / 23.6 mph
Performance measurement:
Max speed VH (level flight): 138 km/h – 75.6kn – 87.0mph
Rate of climb: 24 m/s (5 500 ft/min
Flight time (8s 5000mAh): 11:00 min (+30% reserve)
You will Need:
CA Glue - medium or similar medium viscosity CA glue
Activator for CA Glue or similar, but gas presurized aerosol is better
Snap knife
CA Glue - medium or similar medium viscosity CA glue
Activator for CA Glue or similar, but gas presurized aerosol is better
1x ballpoint pen spring (a spring from old ballpoint pen will work fine)
Snap knife
Soldering Iron or any hot tool
4x 4/30mm self tapping screw for F1 part (fuselage 1)
nylon nuts and screws or any 5-6/60mm
CA Glue - medium viscosity CA glue
Activator for CA Glue or similar, but gas presurized aerosol is better
1.2 mm /16AWG steel pushrod wires
Wire cutter, Z bend pliers or pliers.
Snap knife
9x Hitec HS-82 or similar, size: 30 x 30 x 12mm servos
servo extension cables 300mm / 12 inch
1.5 mm /14AWG pushrod wires for ailerons
1.2 mm /16AWG pushrod wires for flaps
Wire cutter, Z bend pliers or pliers.
some gauge (f.e. ruler)
main LG option A:
1x F4U Corsair FMS designed El Retract Set FMSRE005 RC
1x Alloy Oleo Strut 130mm
Type A LG housing + Main wheel tyre and disc (3dprinted)
8x 4/30mm self tapping screw
main LG option B:
1x Turnigy Metal Servoless Twist n Turn Retracts/leg‘s/wheels 1.20 size
Type B LG housing
8x 4/30mm self tapping screw
main LG option C (minor wing cut needed):
1x Turnigy Full Metal Servoless Retract with 190mm
included oleo legs are too long, you‘ll need to cut it or use these legs
1x Alloy Oleo Strut 130mm
Type C LG housing + Main wheel tyre and disc (3dprinted)
8x 4/30mm self tapping screw
main LG option D (for experts only):
2x Servoless Retract with Metal Trunion 44mm x 41mm Mount
1x Alloy Oleo Strut 130mm
Type C LG housing + Main wheel tyre and disc (3dprintded)
8x 4/30mm self tapping screw
NOTE: you will need to make your own rotating mechanism for retracts
page 20
... print your plane | www.3DLabPrint.com
Tail wheel:
1x Tail Wheel System. w/ Steering & Spring 60-120 Size or similar
2x self tapping screw
Soldering Iron or any hot tool
Motor: Turnigy Aerodrive SK3 - 6354-260KV Brushless Outrunner Motor or similar
ESC: MEZON 120 lite or similar at leats 90A/8s
Battery: 2x Turnigy 5000mAh 4S 25C Lipo Pack w/XT-90 or similar 4s (550g)
+ XT 90 2in1 series adaptor
Propeller: Turnigy Type A Beech Wood 3-Blade Propeller 18x8 or 18/10
alternatively Turnigy Gas Wood Propeller 20x10
Sound system: you can use this
your own Rx/Tx system, 11channel (at least 6ch)
nylon nuts and screws or any 5-6/60mm
adhesive velcro strip for Li-Pol battery, ESC and Receiver
battery strap
some gauge (f.e. ruler)